When it comes to your kitchen, functionality is everything that matters. That is why you need proper planning to lead a smart kitchen remodeling venture. If the kitchen space is past due for a revamp, you need to carefully break down the process step by step to make sure that you get the most out of your kitchen. You need to add more functionality, style, and flare to the heart of the house. But most of the house owners ignore the remodeling of their kitchen because they think that it would cost them a fortune.

Well, this is not true all of the time, you do not need to spend a stupendous amount of money to revamp the kitchen anymore. There is a lot of way in which you can transform your boring kitchen into a kitchen you always dreamed of. And if you are not one of the DIY fanatics, hiring one of the best kitchen contractors for remodeling is not a bad idea either.

Keep in mind that, remodeling the kitchen space will only add more value to the house when you plan to sell it. Anyways, we have compiled a list of the top 12 kitchen remodeling ideas that will not hit hard on your pocket. Keep reading until the end to get the most out of this post.

Tip #1: Replacement Countertops

For this, you need to measure the sizes of all the countertops that you need to replace. Once you have all the measuring of the countertops, you need to give it to the metal fabrication shop who will cut the stainless stain that would fit it.

Keep in mind that you need to have the edges of the stainless steel countertops turned downward to avoid the sharpness, and yes, the bending of the steel will provide a smoother look.

Tip #2: DIY Steel Appliances

Did you know that you can easily purchase Faux steel online? They can be easily cut in the shape of your household appliances. For this, you’ll be needing a pair of scissors, a ruler, squeegee, cutter, pencil, and a hairdryer to apply the material.

At first, you need to thoroughly clean the surface of your appliance, after that, wash off any residue that can prevent the bubbles from forming.

Tip #3: DIY Glass Cabinets

Before you start on this project, you need to start with the cabinet door pre-cut. The materials that you will be needing are:

• Sandpaper
• Drill
• Caulk
• Glass Clip
• Glass Slabs

To buy the perfect glass slabs, you need to visit your local stores and have them custom cut glass pieces for you. Don’t worry, you will be able to find fasteners there as well.

After you have gotten the glass pieces, you need to place the cabinet door face down and use caulk around the frame where you want the glass to sit. Let it dry thoroughly, then attach the fasteners to the back. In the end, you will only need to attach the cabinet door back to its hinges.

Tip #4: The Plate Wall

The first step in making plate hanger is to use paperclips. To tie down the paperclips to the plates, you need to use craft glue.

To finish this project, you need to choose a design layout for your plates and place nails in the wall of the kitchen where you need each plate to go. It’s highly recommended that you begin from the center first and then work outwards.

Tip #5: Pendant Lighting 

This task is for changing over recessed lighting into pendant lighting. With these modest pendant lighting packs, you can have another lighting arrangement running inside minutes.

To introduce, essentially roll the string to the ideal length, screw the end into the attachment of your recessed light, and at that point secure the plate flush against the roof with the included fastener or bolts.

Tip #6: Chalkboard Walls

You can install a shoddy blackboard on a kitchen wall, or use writing slate paint to make changeless structures, similar to a calendar, and even mount a rail or rack for chalk to sit on.

Tip #7: Ceiling Panels

You can refresh any kitchen layout, particularly one with “popcorn” roofs, with the moderately basic use of styrofoam roof boards. The boards can be cut with a blade and stuck straightforwardly to any roof material, including the popcorn roof. Once set up, they offer detail and style that would be difficult to coordinate with even costly and tedious paint jobs as well.

Tip #8: Pallet Wood Backsplash

One of the most interesting and eco-friendly ways to replace any old backsplash is to use pallet wood. The pallet wood can easily be cut into an 18-inch plank, it can be cleaned, and even stained without any hassle. What more? They can easily adhere to any existing backsplash with the help of nails.

Tip #9: Lighting Under The Cabinet

You have the choice of installing a wild exhibit of low-cost under-cupboard lighting to change how your kitchen looks. From models that hold fast to ones you screw in, the lighting can be connected consistently and effortlessly in an assortment of ways.

Tip #10: Mason Jar Chandeliers

You also can make a marvelous ceiling fixture, DIY, from Mason containers, wire, and a bunch of other handful tools.

This makes a country feel, brilliant, and lovely exhibit of lighting from basic containers. A full breakdown of directions for making your own can be found on the internet. These light fixtures can be bought online as well.

Tip #11: Cordwood Floors

You can make a flawless hand-made cordwood floor for your kitchen.

To begin with, you can reap dead trees from any neighborhood woods lawfully. Juniper and pine would be perfect. If you do not have the skills or time, you can hire one of the best contractors who offer residential kitchen remodeling in Margate City NJ.

Tip #12: Pecan Dining Tables

One of the most significant household items in any house is the eating table. With a couple of basic advances and at least cost, you can assemble your own walnut wood feasting table.

Author Bio: Tom Dexter is the proud owner of a renowned kitchen remodeling company. He has been in the business since the past few years. Tom Dexter has trained his staff in such a way that no job is considered to be too big or too small for them. Tom Dexter knows “A happy customers is a loyal customer.”